LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> 5 GS, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Engine Lubrication System >> Oil Pan Removal/Installation >> Oil Pan Removal Note

Oil Pan Removal Note

  1. Set the wiring harness and wiring harness bracket out of the way to access the transaxle upper fitting bolts.
  2. Before loosening the bolts securing the engine and transaxle, put a mark on each transaxle bolt and the transaxle (to determine when they have been turned one full turn), then loosen the bolts one full turn (360°).
    G13726657Courtesy of MAZDA MOTORS CORP.
    CAUTION:
    • Do not loosen the bolts more than one turn (360°), otherwise the transaxle could be damaged.
    NOTE:
    • Loosen the bolts in the order of top to bottom.
  3. Remove the four bolts that secure the engine front cover to the oil pan.
    G13726658Courtesy of MAZDA MOTORS CORP.
  4. Remove the oil pan using a separator tool.
G06204912Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals