Liftgate Opener Switch Inspection

Disconnect the negative battery cable.
Remove the following parts:
1. Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
2. Liftgate side trim (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION .)
3. Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
4. Liftgate light (See LIFTGATE LIGHT REMOVAL/INSTALLATION .)
5. Liftgate garnish (See LIFTGATE GARNISH REMOVAL/INSTALLATION .)
6. Liftgate opener switch (See LIFTGATE OPENER SWITCH REMOVAL/INSTALLATION .)
Verify the continuity of liftgate opener switch terminals B and C.

Courtesy of MAZDA MOTORS CORP.
Verify that the continuity is as indicated in the table.

Courtesy of MAZDA MOTORS CORP.
- If not as indicated in the table, replace the liftgate opener switch.