Exhaust Manifold Installation Note
WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Temporarily tighten the exhaust manifold installation nuts (1) and (2) shown in the figure by hand.
- Tighten the exhaust manifold installation nuts (1) and (2) shown in the figure to 33-53 N.m {3.4 5.4 kgf.m, 25-39 ft.lbf} .
- Temporarily tighten the exhaust manifold installation nuts (3) to (5) shown in the figure by hand.
- Tighten the exhaust manifold installation nuts (3) to (5) shown in the figure.
Exhaust manifold installation nut tightening torque 43-64 N.m {4.4-6.5 kgf.m, 32-47 ft.lbf}
- Tighten the exhaust manifold installation nuts (1) and (2) shown in the figure.
Exhaust manifold installation nut tightening torque 43-64 N.m {4.4-6.5 kgf.m, 32-47 ft.lbf}
- Temporarily tighten the bolts (6) and (7) shown in the figure.
- Tighten the bolt (6) shown in the figure.
Exhaust manifold installation bolt tightening torque 38-51 N.m {3.9-5.2 kgf.m, 29-37 ft.lbf}
- Tighten the bolt (7) shown in the figure.
Exhaust manifold installation bolt tightening torque 38-51 N.m {3.9-5.2 kgf.m, 29-37 ft.lbf}