DTC P0602; Pcm Programming Error: Notes
DETECTION CONDITION & POSSIBLE CAUSE
| DTC P0602:00 |
PCM programming error |
| DETECTION CONDITION |
- No configuration data in the PCM.
Diagnostic support note
- This is a continuous monitor (CCM).
- The check engine light illuminates if the PCM detects the above malfunction condition during the first drive cycle.
- FREEZE FRAME DATA (Mode 2)/Snapshot data is available.
- DTC is stored in the PCM memory.
|
| FAIL-SAFE FUNCTION |
Not applicable |
| POSSIBLE CAUSE |
- Configuration has not been completed
- PCM connector or terminals malfunction
- PCM malfunction
|
| SYSTEM WIRING DIAGRAM |
Not applicable |