LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> 3 Sport, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Systems >> Center Accessory Socket Inspection

Center Accessory Socket Inspection

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
  2. Remove the console-up. (See REAR CONSOLE REMOVAL/INSTALLATION .)
  3. Remove the center accessory socket. (See CENTER ACCESSORY SOCKET REMOVAL/INSTALLATION .)
  4. Connect the tester probe to the position shown in the figure and verify that there is continuity.
Fig 1: Checking Center Accessory Socket
G09788535Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals