Selection of Procedure for Immobilizer System-Related Parts Programming: Notes
- Verify that the ROOM fuse, AT fuse, and SRS2/ESCL fuse are installed.
- Select the applicable programming procedure from the service content of the immobilizer system-related parts.
Immobilizer System-Related Parts Service and Programming Procedure Table
No. Service Programming procedure 1 Additional remote transmitter programming Have remote transmitter that can start engine (See No. 1 Additional Remote Transmitter Programming Procedure (Using the M-MDS) .) 2 Programming due to PCM replacement (See No. 2 Programming Procedure After PCM Replacement .) 3 Start stop unit replacement and programming due to simultaneous replacement of start stop unit/PCM (See No. 3 Start stop unit replacement and programming procedure due to simultaneous replacement of start stop unit/PCM .) 4 Remote transmitter replacement or clearing (See No. 4 Remote transmitter replacement or remote transmitter clearing .) 5 Additional remote transmitter programming There is no remote transmitter available that can start engine (See No. 5 Additional Remote Transmitter Programming Procedure (If there is no remote transmitter available that can start engine) (Using M-MDS) .)