LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> 3 Sport, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Microphone Removal/Installation

Microphone Removal/Installation

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the front map light. (See FRONT MAP LIGHT REMOVAL/INSTALLATION .)
  3. While pressing the tabs A of the voice recognition microphone in the direction of the arrows (1) shown in the figure using a tape-wrapped flat head screwdriver, pull the voice recognition microphone in the direction of the arrow (2) shown in the figure to detach the tabs A of the voice recognition microphone from the front map light.
    Fig 1: Pressing Tabs A Of Voice Recognition Microphone
    G11448808Courtesy of MAZDA MOTORS CORP.
  4. While pulling the tabs B of the voice recognition microphone in the direction of the arrow (1) shown in the figure, pull the voice recognition microphone in the direction of the arrow (2) shown in the figure to detach the tabs B of the voice recognition microphone from the front map light.
    Fig 2: Pulling Tabs B Of Voice Recognition Microphone
    G11448809Courtesy of MAZDA MOTORS CORP.
  5. Remove the microphone.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals