Repeatability Verification Procedure
- Start the engine and leave it idling for 1 min.
- Drive the vehicle normally for 15 min.
After that, shift to 3rd gear and maintain the vehicle speed at approx. 40 km/h {25 mph}.
- Accelerate the vehicle to 60 km/h {37 mph}
while in 3rd gear.
- Release the accelerator pedal and decelerate the vehicle to 40 km/h {25 mph}.
- Accelerate the vehicle to 60 km/h {37 mph}
again while in 3rd gear.
- Drive the vehicle for 20 s
at a speed of 50 km/h {31 mph}
while in 3rd gear.
- Repeat Step 4 to 6 operations above 20 times.
NOTE:
- Match the engine coolant temperature in the recorded FREEZE FRAME DATA/snapshot data, the vehicle speed, and engine speed values to the best extent possible while driving the vehicle.
- Try to reproduce the malfunction by driving the vehicle for 5 min
based on the values in the FREEZE FRAME DATA/snapshot data.