Using the M-MDS

Connect the M-MDS to the DLC-2.
After vehicle identification, select the following from the M-MDS initialization screen.
1. Select "DataLogger".
2. Select "Modules".
3. Select "IC".

Using the simulation function SPEEDOMTR, verify that the values are as indicated in the table.

M-MDS display	Speedometer display
Off	Speedometer needle moves to approx. 0 km/h {0 mph} .
60 km/h	Speedometer needle moves to approx. 57-63 km/h {36-39 mph} .
120 km/h	Speedometer needle moves to approx. 116-124 km/h {72.1-77.0 mph} .

If not as indicated in the table, replace the instrument cluster. (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION .)