Diagnostic Procedure

Step	Inspection		Action
1	VERIFY DSC HU/CM DTC Using the M-MDS, clear the DTC from the DSC HU/CM. (See CLEARING DTC .) Using the M-MDS, perform the DSC HU/CM DTC inspection. (See DTC INSPECTION .) Is the same DTC present?	Yes	Replace the DSC HU/CM, then go to the next step. (See DSC HU/CM REMOVAL/INSTALLATION .)
1		No	Go to the next step.
2	VERIFY NO DTC IS PRESENT Are any DTCs present?	Yes	Go to the applicable DTC inspection. (See DTC TABLE .)
2	VERIFY NO DTC IS PRESENT Are any DTCs present?	No	DTC troubleshooting completed.