LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> MX-5 Miata Club, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control (Service Information) >> DSC HU/Cm Inspection >> Notes

DSC HU/Cm Inspection: Notes

  1. Disconnect the DSC HU/CM connector. (See DSC HU/CM REMOVAL/INSTALLATION .)
  2. Measure the voltage or continuity of the DSC HU/CM wiring harness-side connctor using a tester.
Fig 1: Identifying DSC HU/CM Wiring Harness-Side Connector Terminals
G10952486Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals