LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> MX-5 Miata Club, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Entertainment System >> Condenser Removal/Installation

Condenser Removal/Installation

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the wind blocker. (See WIND BLOCKER REMOVAL/INSTALLATION .)
  3. Partially peel back the side shelf (LH) and rear package trim to a position where the condenser is visible. (See SIDE SHELF REMOVAL/INSTALLATION .) (See REAR PACKAGE TRIM REMOVAL/INSTALLATION .)
  4. Disconnect the connector.
    Fig 1: Removing Condenser Bolt
    G10954959Courtesy of MAZDA MOTORS CORP.
  5. Remove the bolt.
  6. Remove the condenser.
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals