LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> MX-5 Miata Club, Automatic Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Shift Mechanism >> Automatic Transmission Shift Mechanism Removal/Installation >> Control Rod Removal/Installation >> Nut, Washer and Control Rod Component Removal Note

Nut, Washer and Control Rod Component Removal Note

  1. Secure the control rod component with an adjustable wrench as shown in the figure.
    Fig 1: Securing Control Rod Component With Adjustable Wrench
    G10952980Courtesy of MAZDA MOTORS CORP.
    CAUTION:
    • Do not use an impact wrench.
    • When loosening the control rod nut, secure the control rod component without applying torque within the AT.
  2. Remove the control rod nut.
    Fig 2: Removing Control Rod Nut
    G10952981Courtesy of MAZDA MOTORS CORP.
  3. Remove the washer and control rod component.
scientia non olet · About LEMON Manuals