Control Rod Component, Nut and Washer Installation Note

1. Install the control rod component and washer.
   Fig 1: Installing Control Rod Component And Washer

   Courtesy of MAZDA MOTORS CORP.
2. Secure the control rod component with an adjustable wrench and tighten the control rod nut as shown in the figure.

Fig 2: Securing Control Rod Component With Adjustable Wrench

Courtesy of MAZDA MOTORS CORP.

CAUTION:

• Do not use an impact wrench.
• When tightening the control rod nut, secure the control rod component without applying torque within the AT.

  Tightening torque

• 14-18 N.m {1.5-1.8 kgf.m, 11-13 ft.lbf}