LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> MX-5 Miata Club, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Tank Removal/Installation >> Insulator Removal Note

Insulator Removal Note

NOTE:
  • The insulator is installed using rivets.
  1. Push out the mandrel using a hammer and punch (2-2.8 mm {0.08-0.11 in} diameter  ).
    Fig 1: Pushing Out Mandrel Using Hammer And Punch
    G10951723Courtesy of MAZDA MOTORS CORP.
  2. Remove the flange using a drill (5 mm {0.2 in} drill bit  ).
Fig 2: Removing Flange Using Drill
G10951724Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals