| DTC P0722:00 |
Open circuit in output shaft speed sensor circuit |
| DETECTION CONDITION |
- Under the following conditions, the output shaft speed sensor signal is not input:
- Engine is running.
- Vehicle speed signal related DTC is not recorded.
- The vehicle is driven at the specified speed or more.
- There is no difference between vehicle speed signal from DSC HU/CM and output shaft speed sensor signal.
- DTC U0121-00: is not recorded.
|
| FAIL-SAFE FUNCTION |
- Inhibits learning control.
- Inhibits manual mode.
- Inhibits neutral idle control.
- Inhibits AAS.
|
| POSSIBLE CAUSE |
- Output shaft speed sensor malfunction
|
| SYSTEM WIRING DIAGRAM |
Not applicable |