Diagnostic Procedure

STEP	INSPECTION	RESULTS	ACTION
1	VERIFY ALL SYSTEM DTCs NOTE: Display the DTCs of all the modules using the M-MDS. Connect the M-MDS to the DLC-2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS. Select "Self Test". Select "All CMDTCs". Verify the DTC according to the directions on the screen. Are any DTCs present?	Yes	Go to the applicable DTC inspection.
1		No	Go to the next step.
2	VERIFY IF MALFUNCTION SYMPTOM IS CAUSED BY OTHER MALFUNCTION NOTE: There are few malfunction affecting only the fuel economy, therefore it is necessary to verify that other malfunctions are not appearing as symptoms. Verify the vehicle engine condition. Can malfunction symptoms other than "NO. 14 POOR FUEL ECONOMY" be verified?	Yes	Go to the applicable symptom troubleshooting. Refer too SYMPTOM DIAGNOSTIC INDEX [SKYACTIV-G 2.5T] .)
2		No	Go to the next step.
3	INSPECT ENGINE AND VEHICLE CONDITIONS NOTE: Because the vehicle malfunction cannot be verified, it is necessary to inspect the items which may be adversely affecting fuel consumption. Perform the following inspections: Use of inferior fuel Engine oil level Refer too ENGINE OIL LEVEL INSPECTION [SKYACTIV-G 2.5T] .) Engine oil contamination Engine coolant level Refer too ENGINE COOLANT LEVEL INSPECTION [SKYACTIV-G 2.5T] .) Engine compression pressure inspection Refer too COMPRESSION INSPECTION [SKYACTIV-G 2.5T] .) Spark Test Refer too ENGINE CONTROL SYSTEM OPERATION INSPECTION [SKYACTIV-G 2.5T] .) Tire air pressure Wheel alignment Refer too SUSPENSION TECHNICAL DATA .) Improper ATF level Refer too AUTOMATIC TRANSAXLE FLUID (ATF) ADJUSTMENT [GW6A-EL, GW6AX-EL] .) Brake dragging Is there any malfunction?	Yes	Repair or adjust the malfunctioning location and explain the repair contents to the customer based on the inspection result.
3		No	Go to the next step.
4	VERIFY VEHICLE USE CONDITION NOTE: It is necessary to ask the customer about how they use the vehicle because there is no problem with the inspection items from Step 1 to 3. Verify how the customer uses the vehicle with regard to the following applicable items, and provide the customer some pertinent advice: Tires, wheels (large size) Engine operation time is longer than traveled distance Vehicle is driven in congested traffic frequently Vehicle left idling for long periods Amount of fuel injection increases Vehicle is carrying excess items (luggage) Frequent acceleration/deceleration Frequently driving uphill Travel distances are short (engine does not warm up) Driving frequently at high-altitude Driving frequently during strong winds Use of unrecommended engine oil (leads to inappropriate oil viscosity)	-	Symptom troubleshooting is completed.