LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> CX-5 Touring, AWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System (Service Information) - Two-Step Deployment Control System >> Side Air Bag Sensor Removal/Installation [Two-Step Deployment Control System] >> Connector Disconnect Note

Connector Disconnect Note

  1. Press the area (1) indicated by the arrow and slide it as shown in the figure (2).
    Fig 1: Disconnecting Side Air Bag Sensor Connector
    G10937919Courtesy of MAZDA MOTORS CORP.
  2. Lift up the location shown in the figure using a tape-wrapped flathead screwdriver (3) and disconnect the connector (4).
scientia non olet · About LEMON Manuals