LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> CX-5 Touring, AWD >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission System >> Pressure Control Valve Inspection

Pressure Control Valve Inspection

  1. Remove the pressure control valve assembly. (See FUEL TANK REMOVAL/INSTALLATION .)
    CAUTION:
    • Do not apply a pressure 36 kPa {0.37 kgf/cm2 , 5.2 psi} or more. Doing so will damage the pressure control valve and evaporative hose.
  2. Apply a pressure of 36 kPa {0.37 kgf/cm 2, 5.2 psi} to port A.
    Fig 1: Applying Pressure To Port A
    G10916458Courtesy of MAZDA MOTORS CORP.
  3. Verify that there is airflow from port B.
scientia non olet · About LEMON Manuals