SUNVISOR Removal/Installation
- Disconnect the negative battery cable. (with vanity mirror illumination) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5]
.)
- Remove the screw.
Courtesy of MAZDA MOTORS CORP.
- Rotate the sunvisor in the direction of the arrow.
- Unhook and remove the sunvisor.
- Disconnect the vanity mirror illumination connector. (with vanity mirror illumination)
- Press the center adaptor tabs in the direction of the arrow (1) shown in the figure using two tape-wrapped flathead screwdrivers.
Courtesy of MAZDA MOTORS CORP.
- Remove the center adaptor in the direction of the arrow (2) shown in the figure.
- Install in the reverse order of removal.