LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> CX-3 Touring, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Security And Lock System) >> Trunk Lid Opener Switch Removal/Installation >> Vehicle Interior

Vehicle Interior

WARNING: This page is about a different car, the 2014 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
  2. While pressing the trunk lid opener switch tab in the direction of arrow (1) shown in the figure, press it in the direction of arrow (2) to detach the trunk lid opener switch tab from the driver-side lower panel.
  3. Remove the trunk lid opener switch from the driver-side lower panel.
    Fig 1: Removing Trunk Lid Opener Switch From Driver-Side Lower Panel
    G09772005Courtesy of MAZDA MOTORS CORP.
  4. Disconnect the connector from the trunk lid opener switch.
  5. Install in the reverse order of removal.
    Fig 2: Disconnecting Connector From Trunk Lid Opener Switch
    G09772006Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals