LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> CX-3 Touring, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Fuel System) >> Fuel Pump Control Module Removal/Installation

Fuel Pump Control Module Removal/Installation

WARNING: This page is about a different car, the 2014 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
  2. Tip the rear seat back (LH). (See REAR SEAT BACK REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
    Fig 1: Fuel Pump Control Module With Torque Specifications
    G09782734Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.