LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> CX-3 Touring, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Interior Trim) >> Shift Panel Removal/Installation >> ATX

Shift Panel Removal/Installation: ATX

WARNING: This page is about a different car, the 2014 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
  2. Remove the following parts:
    1. Upper panel (See UPPER PANEL REMOVAL .) (See UPPER PANEL INSTALLATION .)
    2. Selector lever knob (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
  3. Remove clip A.
  4. Disconnect the connector.
    Fig 1: Identifying Connector With Clip A
    G09772289Courtesy of MAZDA MOTORS CORP.
  5. Remove the shift panel in the direction of the arrows in the order of (1), (2), (3), (4) while detaching hooks, clips B and clip C.
    Fig 2: Removing Shift Panel
    G09772290Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals