LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> CX-3 Touring, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Front Suspension System) >> Front Stabilizer Control Link Inspection >> Notes

Front Stabilizer Control Link Inspection: Notes

WARNING: This page is about a different car, the 2014 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front stabilizer control link. (See FRONT STABILIZER REMOVAL/INSTALLATION .)
  2. Inspect for bending or damage. If there is any malfunction, replace the front stabilizer control link.
  3. Rotate the front stabilizer control link ball joint stud 10 times and shake it side to side 10 times.
  4. Measure the front stabilizer control link ball joint rotational torque using an Allen wrench and a torque wrench.
scientia non olet · About LEMON Manuals