LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> CX-3 Touring, AWD >> Repair and Diagnosis >> Engine Mechanical >> Accessory Drive Belts >> Engine Mechanical System >> Plug Hole Plate Removal/Installation >> Installation

Plug Hole Plate Removal/Installation: Installation

  1. Press the plug hole plate in the order shown in the figure to insert the adapter to the rubber on the engine side.
    Fig 1: Pressing Plug Hole Plate
    G10968479Courtesy of MAZDA
  2. Press the front part of the plug hole plate at the same time to insert the rubber to the adapter on the engine side.
    Fig 2: Pressing Front Part Of Plug Hole Plate
    G10968480Courtesy of MAZDA
scientia non olet · About LEMON Manuals