Switch Panel Removal/Installation

Disconnect the negative battery cable. (Refer to NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
Open the glove compartment.
Remove the center panel. (Refer to CENTER PANEL REMOVAL/INSTALLATION .)
Remove the screw.

Fig 1: Identifying Switch Panel And Screw
Courtesy of ABLE BODY CORP.
Move the remover tool in the order of arrows (1) and (2) shown in the figure and detach the clips from the dashboard.

Fig 2: Detaching Clips From Dashboard
Courtesy of ABLE BODY CORP.
Disconnect the hazard warning switch connector and remove the switch panel.
When replacing the switch panel, remove the hazard warning switch. (Refer to HAZARD WARNING SWITCH REMOVAL/INSTALLATION .)
Install in the reverse order of removal.