LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> CX-3 Touring, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Foot Support Removal/Installation

Foot Support Removal/Installation

  1. Remove the following parts:
    1. Passenger-side side wall (Refer to SIDE WALL REMOVAL/INSTALLATION .)
    2. Passenger-side front scuff plate (Refer to FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
    3. Passenger-side front side trim (Refer to FRONT SIDE TRIM REMOVAL/INSTALLATION .)
    4. Passenger-side front heat duct (Refer to FRONT HEAT DUCT REMOVAL/INSTALLATION .)
  2. Partially peel back the floor covering.
  3. Remove the fastener.
    Fig 1: Identifying Foot Support Fastener
    G10914853Courtesy of ABLE BODY CORP.
  4. Pull the foot support in the direction of the arrow and remove it.
    Fig 2: Pulling Foot Support
    G10914854Courtesy of ABLE BODY CORP.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals