LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> CX-3 Touring, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Console Side Panel Removal/Installation >> Removal

Console Side Panel Removal/Installation: Removal

  1. Disconnect the negative battery cable. (Refer to NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Center console tray (Refer to CENTER CONSOLE TRAY REMOVAL/INSTALLATION .)
    2. Shift bezel (Refer to SHIFT BEZEL REMOVAL/INSTALLATION .)
    3. Upper panel (Refer to UPPER PANEL REMOVAL/INSTALLATION .)
    4. Selector lever knob (Refer to AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
    5. Shift panel (Refer to SHIFT PANEL REMOVAL/INSTALLATION .)
  3. Pull the console side panel in the direction of the arrow shown in the figure and detach the clips and hooks from the front console.
    Fig 1: Pulling Console Side Panel
    G10914761Courtesy of ABLE BODY CORP.
  4. Pull the console side panel in the direction of the arrow shown in the figure and remove it while releasing the rib.
scientia non olet · About LEMON Manuals