LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> CX-3 Touring, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Center Display Removal/Installation

Center Display Removal/Installation

  1. Disconnect the negative battery cable. (Refer to NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the audio panel No. 2. (Refer to AUDIO PANEL No. 2 REMOVAL/INSTALLATION .)
  3. Remove the audio panel No. 1. (Refer to AUDIO PANEL No. 1 REMOVAL/INSTALLATION .)
  4. Remove the bolts.
    Fig 1: Removing Center Display Bolts
    G10915114Courtesy of MAZDA
  5. Insert the remover tool into the position shown in the figure.
    Fig 2: Inserting Remover Tool Into Position
    G10915115Courtesy of MAZDA
  6. Move the remover tool in the direction of the arrow shown in the figure and detach the center display clip from the dashboard.
  7. Pull out the center display component in the direction of the arrow shown in the figure and disconnect it.
    Fig 3: Pulling Out Center Display Component
    G10915116Courtesy of MAZDA
  8. Remove the center display component.
  9. Remove the connectivity master unit (CMU). (Refer to CONNECTIVITY MASTER UNIT (CMU) REMOVAL/INSTALLATION .)
  10. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals