LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> CX-3 Sport, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Entertainment System) >> AudioPilot®2 MICROPHONE REMOVAL/INSTALLATION

AudioPilot®2 MICROPHONE REMOVAL/INSTALLATION

WARNING: This page is about a different car, the 2014 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • AudioPilot®2 is a registered trademark of Bose Corporation.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
  2. Disconnect the connector.
  3. Remove the nut.
  4. Remove the AudioPilot®2 microphone.
  5. Install in the reverse order of removal.
    Fig 1: Disconnecting Audio Pilot 2 Microphone Connector With Torque Specifications
    G09784200Courtesy of MAZDA MOTORS CORP.