Audio Amplifier Removal/Installation

WARNING: This page is about a different car, the 2014 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
Slide the seat rearward (RH).
Remove the bolt.
Slide the seat forward (RH).

Fig 1: Audio Amplifier Component And Bolt With Torque Specifications
Courtesy of MAZDA MOTORS CORP.
Remove the bolt.
Raise the audio amplifier component and remove the stud bolt from the body.

Fig 2: Audio Amplifier Component And Connector With Torque Specifications
Courtesy of MAZDA MOTORS CORP.
Disconnect the connectors.

Fig 3: Audio Amplifier Component And Connector With Torque Specifications
Courtesy of MAZDA MOTORS CORP.
Remove the nuts.
Remove the audio amplifier.
Install in the reverse order of removal.

Fig 4: Audio Amplifier And Nut With Torque Specifications
Courtesy of MAZDA MOTORS CORP.