LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> 6 Touring, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Security And Lock System) >> Trunk Lid Latch Switch Inspection

Trunk Lid Latch Switch Inspection

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. Remove the trunk lid trim. (See TRUNK LID TRIM REMOVAL/INSTALLATION .)
  3. Remove the trunk lid latch and release actuator. (See TRUNK LID LATCH AND RELEASE ACTUATOR REMOVAL/INSTALLATION .)
  4. Verify that the continuity is as indicated in the table.
    Fig 1: Trunk Lid Latch Switch Continuity Reference Chart
    G09787781Courtesy of MAZDA MOTORS CORP.
    Fig 2: Identifying Trunk Lid Latch And Release Actuator
    G09787782Courtesy of MAZDA MOTORS CORP.
    • If not as indicated in the table, replace the trunk lid latch and release actuator.
    NOTE:
    • When inspecting the latch condition of the trunk lid latch switch, press in the latch lever using a flathead screwdriver and set it to the latched position.
    Fig 3: Pressing Latch Lever Using Flathead Screwdriver
    G09787783Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals