LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> 6 Touring, Automatic Trans >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Seat Belt >> Buckle Switch Inspection

Buckle Switch Inspection

  1. Switch the ignition off.
  2. Disconnect the negative battery cable and wait for 1 min or more.  (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  3. Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION .)
  4. Remove the front buckle. (See FRONT BUCKLE REMOVAL/INSTALLATION .)
  5. Inspect for continuity between the buckle switch terminals using a tester.
    Fig 1: Identifying Buckle Switch Terminals
    G10987055Courtesy of MAZDA MOTORS CORP.
    • If not as indicated in the table, replace the front buckle.
    Fig 2: Buckle Switch Terminals Continuity Chart
    G10987056Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals