LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> 6 Touring, Automatic Trans >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Indicator Unit Inspection >> LED Illumination Inspection >> When using M-MDS

When using M-MDS

  1. Connect the M-MDS to the DLC-2.
  2. After vehicle identification, select the following from the M-MDS initialization screen.
    • "Data logger"
    • "Module"
    • "IC"
  3. Using the simulation function LCD_SEG, verify that the following warning/indicator lights are turned on.
    Fig 1: Identifying Warning/Indicator Lights (With M-MDS)
    G10988414Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals