Section 4 (Automatic Transaxle System (Service Information))

• Automatic Transaxle Location Index
• Mechanical System Test
  • Mechanical System Test Preparation
  • Line Pressure Test
  • Stall Test
  • Time Lag Test
• Road Test
  • Notes
  • Road Test Preparation
  • D Position Test
    • Notes
    • Shift point (Except Mexico, Without i-ELOOP)
    • Shift point (Except Mexico, With i-ELOOP)
    • Shift point (Mexico)
  • M Position Test
    • Notes
    • Shift point (Except Mexico, Without i-ELOOP)
    • Shift point (Except Mexico, With i-ELOOP)
    • Shift point (Mexico)
  • P Position Test
• Automatic Transaxle Fluid (ATF) Inspection
  • Notes
  • ATF Level Inspection
• Automatic Transaxle Fluid (ATF) Replacement
• Automatic Transaxle Fluid (ATF) Adjustment
• M Position Switch Inspection
  • Continuity Inspection
• M Position Switch Removal/Installation
• Up Switch Inspection
  • Continuity Inspection
• Up Switch Removal/Installation
• Down Switch Inspection
  • Continuity Inspection
• Down Switch Removal/Installation
• Steering Shift Switch Inspection
• Steering Shift Switch Removal/Installation
  • Notes
  • Steering Shift Switch Component Removal Note
• Coupler Component Removal/Installation
• Oil Pressure Switch Removal/Installation
  • Notes
  • Oil Pressure Switch A
  • Oil Pressure Switch B
• On/Off Solenoid Removal/Installation
• Automatic Transaxle Removal/Installation
  • Notes
  • Removal
    • Notes
    • No. 4 engine mount bracket removal note
    • Transaxle mounting bolt removal note
  • Installation
• Drive Plate Removal/Installation
  • Notes
  • Drive Plate Installation Bolts Removal Note
  • Drive Plate Installation Bolts Installation Note
• Oil Seal (Differential) Replacement
  • Transaxle Case Side
  • Converter housing Side
• Oil Seal (Control Valve Body) Replacement
• Oil Cooler Removal/Installation
  • Water Hose
  • Water Hose No. 1 and No. 2 (oil cooler side) Installation Note
  • Water Hose No. 1 (outlet case side) Installation Note
  • Water Hose No. 2 (bypass pipe side) Installation Note
  • Oil Cooler
• Control Valve Body Removal/Installation
  • On-Vehicle Removal
  • On-Vehicle Installation
• Initial Learning
  • Introduction
  • Using M-MDS
    • Preparation before servicing
    • Starting procedure for initial learning
  • Not Using of M-MDS
    • Preparation before servicing
    • Starting procedure for initial learning
• TCM Configuration