Snapshot Data

NOTE:

Snapshot data items are not displayed, according to detected DTC.
The data for all DTCs currently detected is stored.

-: Not applicable

Snapshot data item

Unit

Data contents

Data read/use method

Corresponding data monitor items

AAT

°C

°F

Ambient temperature

APP_STATUS

Accelerator Pedal Off/Under20%/Over20%/FAIL

Accelerator pedal position status

CFG_STATUS

Config Complete/Not Configured/Config Error

Instrument cluster configuration status

DCDC_IN_V

DC-DC converter (i-ELOOP) input voltage (input terminal voltage)

DCDC_IN_V

DCDC_OUT_V

DC-DC converter (i-ELOOP) output voltage (output terminal voltage)

DCDC_OUT_V

DCDC_OUT_I

DC-DC converter (i-ELOOP) output current

DCDC_OUT_I

ECT_STATUS

Under 0 degrees C/0 - Under 80 degrees C/Over 80 degrees C/FAIL

Engine coolant temperature status

IC_VPWR

Instrument cluster power supply voltage

When DTC is detected, instrument cluster displays power supply voltage value of instrument cluster in M-MDS.

IG-ON_TIMER

hh:mm:ss⁽¹⁾

Elapsed time since ignition was switched ON

NOTE:

The instrument cluster records the elapsed time since the ignition was switched ON.

When DTC is detected, instrument cluster displays elapsed time since ignition was switched on in M-MDS.

PWR_MODE_KEY

Key Out/Key Recently Out (Position 0)/Accessory (Position 1)/Post Ignition (Position 2)/Ignition On (Position 2)/Running (Position 2)/Running - Starting

Key Out: Ignition switched to off
Key Recently Out (Position 0): Elapsed time within 3 s since ignition was switched to off
Accessory (Position 1): Ignition is switched to ACC
Post Ignition (Position 2): Elapsed time within 3 s since ignition was switched ON
Ignition On (Position 2): Ignition switched ON (engine off)
Running (Position 2): Ignition switched ON (engine on)
Running - Starting: Cranking condition

When DTC is detected, instrument cluster displays ignition switch status in M-MDS.

RPM_STATUS

Engine Stop/Under1500rpm/Over1500rpm/FAIL

Engine speed status

When DTC is detected, instrument cluster displays engine speed in M-MDS.

SHIFT_STATUS

P/N/D/R/FAIL

Selector lever position status

When DTC is detected, instrument cluster displays selector lever position in M-MDS.

TOTAL_DIST

Miles

Accumulated total traveled distance from completion of vehicle until instrument cluster detects DTC (Odometer value in instrument cluster)

The distance traveled when the instrument cluster detected a DTC can be calculated by performing the following procedure.

Verify the odometer value in the instrument cluster.
Verify the snap shot data item TOTAL_DIST.
Subtract 2 from 1.

TOTAL_TIME

hh:mm:ss⁽¹⁾

Accumulated total elapsed time since vehicle completion until detects a DTC

NOTE:

When the ROOM removed, and the ignition is switched to off, the time is not included in the elapsed time.

The elapsed time when the instrument cluster detected a DTC can be calculated by performing the following procedure.

Verify the PID item TOTAL_TIME of the instrument cluster.
Verify the snap shot data item TOTAL_TIME.
Subtract 2 from 1.

VPWR

Power supply voltage

VSPD_STATUS

Stop/0-10km/h/Over10km/h/FAIL

Vehicle speed status

When DTC is detected, instrument cluster displays vehicle speed in M-MDS.

⁽¹⁾	The seconds may be indicated after the decimal point.