LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> 3 Sport, 4D Hatchback, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control (Service Information) >> DSC HU/Cm Removal/Installation >> Connector Installation Note

Connector Installation Note

  1. Connect the connector and pull the lock lever up in the direction of the arrow.
    Fig 1: Pulling Brake Pipe Lock Lever
    G10960807Courtesy of MAZDA MOTORS CORP.
  2. After connecting the connector, verify that the connector cover is completely pushed in.
scientia non olet · About LEMON Manuals