| DESCRIPTION |
Power system: Low input |
| DETECTION CONDITION |
Determination conditions |
- Any one of the following conditions is met:
- Battery voltage is 11 V or less
when ignition is switched off after leaving vehicle for 30 days or more
.
- Battery voltage is 11 V or less
for a continuous 5 days
when ignition is switched off.
|
| Preconditions |
- Difference in battery voltage for 30 min
since ignition was switched off is specified value or less
- Electrical current from battery for 30 min
since ignition was switched off is within specified value
|
| Drive cycle |
|
| Self test type |
|
| Sensor used |
|
| FAIL-SAFE FUNCTION |
- Inhibits the i-ELOOP control.
|
| VEHICLE STATUS WHEN DTCs ARE OUTPUT |
- Illuminates master warning light.
- The engine cannot be started or the engine may stall due to battery voltage decrease.
|
| POSSIBLE CAUSE |
- Battery malfunction
- Current sensor malfunction
- Front body control module (FBCM) malfunction
- PCM malfunction
|