| DETECTION CONDITION |
- Indicates an error occurred in the PCM.
Diagnostic support note
- This is a continuous monitor (CCM).
- The check engine light illuminates if the PCM detects the above malfunction condition during the first drive cycle.
- FREEZE FRAME DATA (Mode 2)/Snapshot data is available.
- DTC is stored in the PCM memory.
|
| FAIL-SAFE FUNCTION |
- Restricts the upper limit of the engine speed.
|
| POSSIBLE CAUSE |
- PCM connector or terminals malfunction
- Software incompatibility issue
- PCM malfunction
|
| SYSTEM WIRING DIAGRAM |
Not applicable |