Continuity Inspection

Verify that the CPP switch is installed properly. (Refer to CLUTCH PEDAL POSITION SWITCH REMOVAL/INSTALLATION .)
Disconnect the negative battery cable. (Refer to NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
Disconnect the CPP switch connector.
Verify that the continuity between CPP switch terminals A and B when the clutch pedal is depressed and when it is released is according to the following table:

Fig 1: Identifying CPP Switch And Connector Terminals
Courtesy of MAZDA
- If not as verified, replace the CPP switch. (Refer to CLUTCH PEDAL POSITION SWITCH REMOVAL/INSTALLATION .)