Active Driving Display Inspection: Notes

Connect the M-MDS to the DLC-2.
After vehicle identification, select the following from the M-MDS initialization screen.
1. "Data logger"
2. "Module"
3. "IC"

Using "LCD_SEG", verify that the display screen and open/close angle for the combiner change by pressing the tripmeter switch.

Number of times tripmeter switch is pressed

Display screen

Combiner open/close angle

-

G10963856

Courtesy of MAZDA MOTORS CORP.

G10963857

Courtesy of MAZDA MOTORS CORP.

1 time

G10963858

Courtesy of MAZDA MOTORS CORP.

G10963859

Courtesy of MAZDA MOTORS CORP.

2 times

G10963860

Courtesy of MAZDA MOTORS CORP.

G10963861

Courtesy of MAZDA MOTORS CORP.

3 times

G10963862

Courtesy of MAZDA MOTORS CORP.

G10963863

Courtesy of MAZDA MOTORS CORP.

4 times

G10963864

Courtesy of MAZDA MOTORS CORP.

G10963865

Courtesy of MAZDA MOTORS CORP.

5 times

G10963866

Courtesy of MAZDA MOTORS CORP.

G10963867

Courtesy of MAZDA MOTORS CORP.

6 times⁽¹⁾

G10963868

Courtesy of MAZDA MOTORS CORP.

G10963869

Courtesy of MAZDA MOTORS CORP.

⁽¹⁾	Because the combiner open/close angle cannot switch if the tripmeter switch is pressed before the combiner fully closes, press the tripmeter switch after the combiner is fully closed.

If the display screen and open/close angle for the active driving display cannot be changed, refer to the symptom troubleshooting.