LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> 3 Sport, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Systems >> Center Accessory Socket Inspection

Center Accessory Socket Inspection

  1. Disconnect the negative battery cable. (refer to NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
  2. Remove the console-up. (refer to REAR CONSOLE REMOVAL/INSTALLATION .)
  3. Remove the center accessory socket. (refer to CENTER ACCESSORY SOCKET REMOVAL/INSTALLATION .)
  4. Connect the tester probe to the position shown in the figure and verify that there is continuity.
    Fig 1: Checking Continuity In Center Accessory Socket
    G10963833Courtesy of MAZDA MOTORS CORP.
    • If it cannot be verified, replace the center accessory socket.
scientia non olet · About LEMON Manuals