LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> 3 Sport, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control (Service Information) >> Front Abs Wheel-Speed Sensor Removal/Installation >> Notes

Front Abs Wheel-Speed Sensor Removal/Installation: Notes

  1. Remove the mudguard. (Refer to MUDGUARD REMOVAL/INSTALLATION .)
  2. Remove in the order indicated in the table.
  3. Install in the reverse order of removal.
  4. After installation, verify that there is no twisting in the front ABS wheel-speed sensor.
    Fig 1: Front ABS Wheel-Speed Sensor Related Components With Torque Specification
    G10960809Courtesy of MAZDA MOTORS CORP.
    COMPONENT DESCRIPTION

    1 Connector
    2 Bolt
    3 Front ABS wheel-speed sensor
    (See Front ABS Wheel-speed Sensor Wiring Harness and Clip Disconnection Note .)
scientia non olet · About LEMON Manuals