LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2016 >> 3 Sport, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System >> Front Combination Light Disassembly/Assembly >> Cover Installation Note

Cover Installation Note

  1. Install the cover to the housing so that there is no gap between the housing and the cover.
    CAUTION:
    • If there is a gap between the housing and the cover, water may penetrate through the gap, causing a front combination light malfunction. Verify that there is no gap between the cover and the housing.
    Fig 1: Identifying Cover And Housing
    G10962742Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals