LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2015 >> MX-5 Miata Club, Automatic Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transmission Shift Mechanism >> Selector Lever Component Inspection

Selector Lever Component Inspection

  1. Remove the battery cover.
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
  3. Remove the shift knob. (See SELECTOR LEVER REMOVAL/INSTALLATION .)
  4. Remove the console panel and indicator assembly. (See SELECTOR LEVER REMOVAL/INSTALLATION .)
  5. Disconnect the selector lever component connector.
  6. Verify continuity as indicated in illustration.
    • If there is any malfunction, replace the selector lever. (See SELECTOR LEVER REMOVAL/INSTALLATION .)
      Fig 1: Terminal Continuity Chart
      G06150490Courtesy of MAZDA MOTORS CORP.
      Fig 2: Selector Lever Component Connector
      G06150491Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals