LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2015 >> MX-5 Miata Club, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Clutch Pedal Position (CPP) Switch Inspection >> Continuity Inspection

Continuity Inspection

  1. Remove the CPP switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION ).
  2. Verify that the continuity between CPP switch terminals D and B is as indicated in the table in figure.
    • If not as indicated in the table in figure, replace the CPP switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION ).
    • If the monitor item condition/specification (reference) is not within the specification, even though there is no malfunction, perform the "Circuit Open/Short Inspection ".
      Fig 1: Clutch Pedal Position (CPP) Switch Continuity Chart
      G07877767Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals