DTC P0706: 00 Transaxle Range Sensor Range/Performance Problem: Notes
DTC P070600 DETECTION CONDITION AND POSSIBLE CAUSE
| DTC P0706:00 |
Transaxle range sensor range/performance problem |
| DETECTION CONDITION |
- Under the following condition, pattern identification error in switch condition of transaxle range sensors 1 to 4:
- Battery voltage is 8 V or more
.
Diagnostic support note
- The check engine light illuminates if the TCM detects the above malfunction condition in two consecutive drive cycles or in one drive cycle while the DTC for the same malfunction has been stored in the TCM.
- The automatic transaxle warning light illuminates if the TCM detects the above malfunction condition in two consecutive drive cycles or in one drive cycle while the DTC for the same malfunction has been stored in the TCM.
- PENDING CODE is available.
- FREEZE FRAME DATA is available.
- DTC is stored in the TCM memory.
|
| FAIL-SAFE FUNCTION |
- Inhibits learning control.
- Inhibits manual mode.
- Inhibits neutral idle control.
- Inhibits AAS.
|
| POSSIBLE CAUSE |
- Transaxle range sensor (built-into TCM) malfunction
|
| SYSTEM WIRING DIAGRAM |
Not applicable |