LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2015 >> CX-5 Touring, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Conventional Brake System) >> Power Brake Unit Inspection >> Using SST >> After-inspection procedure

After-inspection procedure

WARNING: This page is about a different car, the 2013 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. After the inspection, remove the SSTs  , install the brake hose, clamp, and brake pipe to the original positions, and then bleed the air from the brake line. (See BRAKE HOSE (FRONT) REMOVAL/INSTALLATION ). (See BRAKE FLUID AIR BLEEDING ).
scientia non olet · About LEMON Manuals