Generator Installation Note

WARNING: This page is about a different car, the 2013 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

To facilitate the installation of the generator to the engine, grasp the spacer in the bolt installation hole using pliers and push it down to the nut side.

Fig 1: Pushing Spacer Down To Nut Side Using Pliers
Temporarily install the generator to the engine with the bolt C.
Align the generator fixing hole with the engine side hole, then temporarily tighten the generator installation bolt B.
Securely tighten the generator installation bolts in the order of B, C.

Fig 2: Generator Installation Bolts Tightening Sequence With Torque Specifications