Without using M-MDS

Remove the fuel pump relay.
CAUTION:
- Short the specified terminals because shorting the wrong terminal of the relay and fuse block may cause malfunctions.
Fig 1: Identifying Fuel Pump Relay
Courtesy of MAZDA MOTORS CORP.
Using a jumper wire, short fuel pump relay terminals C and D in the relay and fuse block.
Connect the negative battery cable and operate the fuel pump. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
- If the fuel pump cannot be operated, remove the fuel using the procedure in the reference. (See FUEL SIPHONING PROCEDURE NOT USING FUEL PUMP .)
  
  Fig 2: Identifying Fuel Pump Relay
  Courtesy of MAZDA MOTORS CORP.
CAUTION:
- The fuel pump could be damaged if it is operated while there is no fuel in the fuel tank. Verify the amount of fuel being discharged from the hose and stop operation of the fuel pump when essentially no fuel is being discharged.

Remove the jumper wire to stop the fuel pump.
Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)